Kennedy’s Custom Cam Data Form

Please fax to 716-693-2702 or

Call 716-693-5354 with your information 

Name:                                                            Address:

Phone (with area code):                                   Email:

Engine (manufacturer, type/model designation, displacement, year if applicable):

Type of cam (check)

Solid flat tappet:___                                     Solid roller:___

Hydraulic flat tappet: ___                              Hydraulic roller: ___

Primary Usage (check)

Street performance: ___                               Street/strip: ___

Drag race: ___                                             Oval track: ___

Marine endurance: ___                                 Marine drag: ___

Pulling: ___                                                 Road race: ___ 

Vehicle Information:

Weight:                                                      Transmission:  

Rear end ratio:                                            Max RPM:

Fuel:                                                           Ignition:

Nitrous:  Y   N                                              Nitrous HP:

Roots blower:  Y   N                                     Boost:

Centrifugal SC:  Y   N                                    Boost:

Turbo:  Y   N                                                Boost:

Rocker ratio (OHV engines):                          Compression ratio:

Intake valve diameter:                                  Exhaust valve diameter:

Cylinder head used:                                      Ported:  Y   N

Carbureted:  Y   N                                        Carburetor brand/CFM:

Fuel injected:  Y   N                                      Throttle body size:

Intake manifold:

Comments:

Note: custom cams are for off-road use only. They WILL void your vehicle manufacturers warranty and carry no warranty other than for defective cores, which will be replaced at our discretion. 

Performance cams may cause piston to valve clearance problems, coil bind, and other types of interference. It is the users responsibility to check for these types of issues. To perform as designed, appropriate supporting components (springs, pushrods, rockers, retainers, etc.) must be used with your camshaft. Kennedy's can advise about the parts needed and supply them at a competitive price. A new cam will usually require tuning for maximum performance. 

Please refer to our Custom Cam page for more information including pricing.